Configuring events for the Uniform Detection module🔗
The Uniform Detection module generates the Checked for uniform event. This event is generated when a person is detected either wearing or not wearing uniform.
To add a scenario that triggers the Checked for uniform event:
Run the Eocortex Configurator application.
Go to the
Automation.Select the required camera in the camera tree.
Click the
button located to the right of the Tasks on system events heading.The Adding task to be performed on system event window opens.
In the System event field, select the Checked for uniform event.
In the Action field, select the action to be performed when the specified event occurs.
Click the Apply button.
In the Action settings window that opens, go to the Runtime conditions tab.
Configure the conditions for performing the action.
In the Event attribute field, it is possible to select:
Alert type
Uniform check result
Hard hat
Safety vest
Respirator
Glasses
Face shield
Hearing protection
Gloves and mittens
Clothing of set color
For the Uniform check result attribute, the following values are available in the Value field:
No hard hat
Hard hat presence
No vest
Safety vest presence
No required clothing
Required clothing presence
Respirator presence
No respirator
Glasses presence
No glasses
Face shield presence
No face shield
Hearing protection presence
No hearing protection
Gloves/mittens presence
No gloves/mittens
For the uniform and personal protective equipment types selected as attributes, either Absence or Presence can be selected in the Value field.
Two values are available for the event attribute Alert type: Line intersection and Movement in the area.
When the conditions have been configured, click the Apply button.
Warning
The module will start working only when the settings are applied.
Related references