Personnel Activity Monitoring

Personnel monitoring Module allows monitoring staff activity time at workstations. By activity is meant fixing movement in the working zone, including minor movements.

Warning

This module will only work on the cameras on which it has been enabled by the administrator of video surveillance system.

Select Show activity control zones in the cell context menu to display the information on the personnel activity, after the camera real-time viewing the areas limits will be displayed in the frame, and the area number and status will be displayed in the header of each area. The status can take one of three values: Active area, Low-activity area and Inactive area. For inactive area the header and the limits will change from orange to red.

All the module events are recording in the Events log.

"Personnel monitoring" report

To generate a report, select Reports from the main menu, then select the Personnel monitoring report, set the time interval, select the cameras and zones for which the report will be generated, and then click the Build button.

Set the time period for which the report will be generated. The field with the list allows to set the interval prior to the current time, for which the report must be generated, by selecting one of the values: Minute, Hour, Day, Week, Month.

To save the report to the drive, click the Export button; in the appeared window, select the location where the report should be saved; if necessary, change the File name; click Save.

Related references

Configuring the Personnel activity monitoring module

Requirements and recommendations for the Personnel activity monitoring module