Display settings🔗

In live view mode, you can turn on the display of the recognized license plates as well as the interface control of the barrier. To do this, select the cell and click the /win-client/analytics/img/lpr-1.png icon, or select LPR module settings in the context menu — module settings window will open.

../../_images/lpr-2.png

Setting, available in this window, are listed below:

../../_images/lpr-3.png ../../_images/lpr-4.png

Enable the panel with number plates enables display of the panel (on the right side of the cell) with a list of recognized license plates.

View mode allows to configure the displayed information.

If Automatic selection of the new number plates is checked, the last recognized license plate shall be highlighted in the recognized license plates list.

If Group similar number plates is checked, only one entry will be in the list for those license plates, which have been recognized several times in 5 minutes.

If Show the barrier control buttons is checked, Open / Close barrier /win-client/analytics/img/autorec-panel-3.png buttons will be displayed at the top of the panel: when clicking these buttons, commands are sent for closing and opening of the barrier. As most of the barriers are closed automatically, closing button may remain unused. This option is available when the barrier control mode is enabled on the channel.