Video analytics setup

On the Analytics tab the video analysis modules are set up.

On this tab, the settings of all the existing Eocortex video analysis modules are displayed, regardless of the presence of licenses for particular modules on the present server.

For enabling or disabling a video analytics module that analyzes the video stream set in the settings of the motion detector it is required to enable or disable the corresponding switch.

By the press of the button the hint appears stating which capabilities must be enabled or disabled for activation and proper functioning of the module.

If the module is on, then by the press of the button the module settings window is opened. The button resets the settings to the default values. If these buttons are not displayed, the module requires no additional adjustment.

The settings of each module are described in the Video analytics section.

For the operation of some video analysis modules it is required to enable and set up the perspective first. The button located to the right of the Perspective switch opens the perspective settings window.

The perspective can be set using two scale forms which are dragged with the mouse to the corresponding area of the frame and adjusted in a way that the height of the form matches the height of the persons in the given area of the frame. In order to change the size of the form it is necessary to click on the upper or lower edge of the form and, holding the mouse button, move the pointer up or down.