Tracking🔗

The Tracking module allows to build trajectories of the objects that move in the fields of view of the cameras, track the crossing of lines by these objects in one or both directions, monitor the presence of the objects in the zones of arbitrarily set shapes, and also filter alarm events by object type. At that, the monitored lines and zones as well as the objects’ trajectories can be shown on the screen in real time, and the objects themselves can be highlighted by the rectangles of various colors. All the events of the module are recorded in the event log.

Warning

This module will only work on the cameras on which it has been enabled by the administrator of video surveillance system.

Note

All objects causing alarms are being highlighted with non-disablable red boxes.

../../_images/winclient-using2.png

For tracking convenience it is also possible to:

  • display the zones and lines;

  • track the objects' trajectories;

  • display the colored frames of the objects;

  • view object frames by category.

To do this select the relevant subitems in Tracking item of the cell context menu.

Note

Crosslines and zones will be highlighted at the moment of crossing the line and entering the zone, even when displaying of lines and zones in the cell is turned off.

Note

Viewing object frames by category is only available for cameras where Filter by categories mode is enabled and configured.

All the module events are recording in the Events log.