Uniform Detector🔗
The Uniform Detector is designed to detect people both in workwear and without it. In live view, such people will be highlighted on the screen with a colored frame, and the incidents will be recorded in the event log.
Note
The alarm event is the event of the absence of workwear, a common one is the presence of workwear. Depending on the event, the detection frame and the corresponding text will be highlighted in red or green.
The main use case for this module is to monitor compliance with occupational safety rules at manufacturing and construction sites.
Capabilities of the module
Depending on the corresponding settings, the module can determine Presence, Absence or both values of the following parameters:
Hard hat;
Safety vest;
Uniform.
If the Uniform parameter is selected, it is necessary to set a color for it.
Details
For the proper functioning of the module it is required to place the camera correctly and to set up the software motion detector and the module itself.
Warning
It is required to install the Eocortex Neural Networks package before using the module.
Warning
Starting with version 3.5 of Eocortex, the Tracking, Search for objects and Uniform Detector modules running on the same camera share the processor and video card resources. This reduces the load on the server.
For the most efficient sharing of resources, it is recommended to set the same operating mode for the camera in the settings of these modules: either using a video card or without using a video card.
Compatibility with other modules
OS |
Requires Eocortex motion detector |
Neural networks |
Compatible with modules |
Incompatible with modules |
||
---|---|---|---|---|---|---|
Standard |
Special |
|||||
√ |
√ |
√ |
+ |
+ |
|
|
√ |
supported and required for the module to work |
+ |
supported and provides additional features of the module |
– |
not supported or not required for the module to work |
⚠ |
not recommended for use with the current module |
Use
Use of the module in the Eocortex Client application.