Integration of thermal cameras and face recognition🔗

For some camera models that combine the features of a thermal camera and a normal surveillance one, it is possible to send the thermal camera data to the face recognition module.

Warning

This option is available for a limited number of camera models only and can be used exclusively in the 64-bit Windows version of Eocortex.

To enable this capability, go to the Camera analytics tab in the camera settings of the Eocortex Configurator application, activate Temperature for recognized faces, open the settings window by pressing /img/ico-settings.png and set the alarm temperature that will generate the alarm events. It is also required to enable and set up any face recognition module on the camera.

../_images/thermo-config-turn.png

When everything is done, it will become possible to set up a task upon the event of Face with high temperature detected.

../_images/thermo-config-event.png

In the Eocortex Client application, the temperature of the person will be displayed in the real-time video on the face recognition panel.

../_images/thermo-client.png

In case a person running a fever is detected, a corresponding event will be registered in the event log. The corresponding frame from the archive will be displayed upon selecting this event; the recognized face will be highlighted by a rectangular frame.

../_images/thermo-eventlog.png

The temperature of the person will be registered in the report regarding the recognized faces. Persons running a fever will be marked by orange rectangular frames, those with normal temperature will be marked by grey frames.

It is also possible to filter the list to display the persons with high temperature.

../_images/thermo-report.png