Object Classification and Counting🔗

The Object Classification and Counting counts objects that are crossing specified lines or contained in predefined areas of arbitrary shape, distinguishing them by categories.

Warning

This module will only work on the cameras on which it has been enabled by the administrator of video surveillance system.

Object Classification and Counting report

The representation of the Object Classification and Counting report depends on the type of counting:

Counting objects in area: The count of objects within the area.
Line intersection: The count of objects that crossed the line in a specified direction. The following parameters will be displayed:
Total count of objects: Objects that have crossed the line since the start of counting or since the last time the counters were reset.
Change in the number of objects: Objects that have crossed the line at each time interval equal to the report plotting step.

To form a report set the time interval, select categories of objects, areas and lines, for which the report will be built, and then click Build.

Warning

The report generation start time mustn't coincide with the counter reset time. The counter is specified when setting up the module, contact your administrator for information on the module.

Note

Plotting step is determined automatically depending on the set time interval:

Interval	Step
Up to 1 hour	30 seconds
From 1 to 2 hours	1 minute
From 2 to 10 hours	5 minutes
From 10 to 20 hours	10 minutes
From 20 hours to 2 days	30 minutes
From 2 to 4 days	1 hour
From 4 days to 2 months	12 hours
From 2 to 4 months	1 day
From 4 months to 1 year	3 days
More than 1 year	1 week

Note

Maximum allowable interval for plotting the report is 2 years.

The report can be exported as a CSV or Excel file.