Video🔗

Video proportions: Allows selecting how images are scaled in cells:
Stretch: The image will be stretched in a cell.
Save proportions: The proportions set by the camera will be used.
Auto: The application automatically determines whether to stretch the image or keep the proportions.
Preferred video stream for display: Allows selecting which streams will be displayed on the screen and how:
Auto: The stream with the resolution closest to the current resolution of the cell will be displayed during surveillance.
Maximum: The stream with the highest resolution will be displayed for all channels in all modes during surveillance.
Minimum: The stream with the lowest resolution will be displayed for all channels in all modes during surveillance.
Average: The stream with the resolution closest to the current resolution of the cell will be displayed during surveillance. In this algorithm, preference is given to those streams whose resolution will be reduced, because the image on the screen is blurred when the resolution is increased.
Show info about codec, resolution, bitrate, frequency and IP-address: If this option is enabled, the appropriate information for the displayed stream will be located in the upper left corner.
Show debug info: If this option is enabled, the debug information for each channel will be displayed in the upper left corner.
Font size: Sets the font size used to display the camera name and additional information.
Horizontal alignment: Sets the horizontal alignment of the camera name and additional information relative to the cell.
Vertical alignment: Sets the vertical alignment of the channel name and additional information relative to the cell.
Use high quality: If this option is enabled, the image will be sharper, but the CPU and RAM load will increase.
Allow H.264 decoding on video card: If this option is enabled, the processor and Eocortex Client application may not work properly. Please disable this option if there are any issues.
Enable display speed limitation (only for MJPEG): If this option is enabled, the screen will display within the specified maximum permissible frame rate. This limitation may be useful to reduce the CPU and RAM load of the computer.
Disable hardware acceleration: This option is required for non-updated driver versions on Intel graphics cards embedded in 11th generation processors. If the driver version is updated, this option is not required. If this option is enabled, the smoothness of the Eocortex Client application interface may be degraded.
Keep camera connections in the background: If this option is enabled, the connection with other cameras will be saved in full-screen mode. The option allows avoiding delays when returning to grid mode, but may result in higher CPU and network load.