Display settings🔗

In live view mode, it is possible to enable the display of recognized license plates and the barrier control interface. To do this, select the cell and click on the ico-lpr-black icon.

../../../_images/liveview.png

After that, clicking on the ico-lpr-setting-black button will open the window for setting the module panel display.

../../../_images/lpr-view-setting.png

The following settings are available in the window:

View mode: allows to configure the displayed information.

../../../_images/lpr-view-setting-mode.png

If Automatic selection of new license plates is checked, the last recognized license plate shall be highlighted in the recognized license plates list.

If Group similar license plates is checked, only one entry will be in the list for those license plates, which have been recognized several times in 5 minutes.

If Show the barrier control buttons is checked, displays the ico-lpr-barrier-black buttons. Clicking on these buttons commands the barrier to open/close. Since most modern barriers close automatically, the close button may not be used. This option is available when the barrier control mode is enabled on the channel.